Xerox 4112 用户指南

下载
页码 364
Xerox 4112/4127 Copier/Printer System Administration Guide
9-14
9. Troubleshooting
When the IP address of a computer or a computer name is 
changed, queries and chancel processes from the machine 
will not be performed correctly. Switch the machine off and on 
when there is no print data in the receiving buffer.
NOTE: Canceling print jobs or forcing the machine to print the 
remaining jobs in the receiving buffer can be operated from the 
control panel on the machine. For information, refer to the User 
Guide, Chapter 2, the section entitled “Job Status.” 
CentreWare Internet Services
Troubleshooting
This section describes the causes and recommended remedies 
for errors that may occur while using CentreWare Internet 
Services.
Symptom
Remedy
CentreWare Internet
 Connecting with Services is 
impossible.
Is the machine working properly?
Check if the machine is powered on.
Is CentreWare Internet Service activated?
Print out the 
Printer Settings List
 to confirm.
Is the Internet address correctly entered?
Confirm the Internet address again. If the problem persists, enter 
an IP address to make a connection.
Is a proxy server being used?
Depending on the proxy server, connections may not be possible. 
Set the browser not to “Use proxy server” or set that particular 
address not to use a proxy server.
The “Please wait” message is 
displayed throughout.
Wait for a while as instructed.
If the status does not change, click the 
Refresh
 button.
If this does not have any effect, confirm the machine is working 
properly.
The 
Refresh
 button is not working.
Are you using a specified browser?
Refer to 
 to confirm if your browser is supported.
Selecting the menu on the left frame 
does not update the right frame 
contents.
The screen display is distorted.
Change the window size for the browser.
The latest information is not 
displayed.
Click the 
Refresh
 button.
The Apply New Settings button does 
not reflect the new settings.
Are all entered values correct?
If a value outside of the permitted range is entered, the update will 
automatically be made within the range.