Xerox 4112 用户指南
Xerox 4112/4127 Copier/Printer System Administration Guide
3-2
3. Using CentreWare Internet Services
Configuration on the machine
This section describes the configuration procedure for using
CentreWare Internet Services on the machine.
First enable the Internet service port, then set the IP address.
First enable the Internet service port, then set the IP address.
1.
Enter the System Administrator Mode (Chapter 1 Entering the
System Administrator Mode on page 1-15
System Administrator Mode on page 1-15
)
2.
Enable either the LPD port or the Port 9100 port as
appropriate. In this example, the LPD port is enabled.
a. Select
appropriate. In this example, the LPD port is enabled.
a. Select
System Settings
.
b. Select
Connectivity & Network Setup
.
c. Select
Port Settings
.
d. Select
Internet Services (HTTP)
and then select
Change
Settings
.
e. Select
Port Status
and select
Change Settings
.
f. Select
Enabled
and then select
Save
.
g. Select
Close
repeatedly until the
Connectivity & Network
Setup
screen is displayed
3.
If necessary, set the IP Address (Chapter 1 Setting the IP
address. on page 1-17).
address. on page 1-17).
4.
Exit the System Administrator Mode (Chapter 1 Exiting the
System Administrator Mode on page 1-16).
System Administrator Mode on page 1-16).
5.
After the machine is restarted, print out the
Printer Settings
List
to confirm that the Internet service port is enabled.