Xerox 4112 用户指南
Xerox 4112/4127 Copier/Printer System Administration Guide
4-3
4. E-mail
Register a Mail Account
In order to use e-mail on the machine, a mail account for the
machine needs to be registered.
Configuring the E-mail
Environment
Enable the port and configure the machine e-mail address,
TCP/IP environment, and e-mail server from the machine.
NOTE: The configuration can also be performed using
CentreWare Internet Services.
CentreWare Internet Services.
Configuration procedure
Overview
This section describes the configuration procedure to use the e-
mail feature on the machine.
The following two steps are necessary to use the e-mail feature:
•
The following two steps are necessary to use the e-mail feature:
•
Enabling the port and setting TCP/IP: Set the machine to be
able to use TCP/IP
•
Configuring the e-mail feature: Set the e-mail function items
on the machine.
Enabling the ports and setting the IP addresses
This section describes the configuration procedure to use TCP/IP
on the machine.
First enable the e-mail port, then set the IP address.
First enable the e-mail port, then set the IP address.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
1.
Enter the System Administrator Mode (Chapter 1 Entering the
System Administrator Mode on page 1-15
System Administrator Mode on page 1-15
)
2.
Enable the ports that are used for the e-mail feature.
a. Select
a. Select
System Settings
.
b. Select
Connectivity & Network Setup
.
c. Select
Port Settings
.
d. Select
Send E-mail
and then select
Change Settings
.
e. Select
Port Status
and select
Change Settings
.
f. Select
Enabled
and then select
Save
.
g. Select
Recieve E-mail
and then select
Change Settings
.