Xerox xd100 用户指南
25
Alternate Paper Tray
(XD104/ 105f/ 124f/ 155df only)
The alternate paper tray can be used to feed multiple sheets of standard
paper, or it can be used to feed single sheets of special or heavy papers
such as note cards, transparencies, and labels.
paper, or it can be used to feed single sheets of special or heavy papers
such as note cards, transparencies, and labels.
The alternate paper tray holds up to 50 sheets of 20 lb/ 80 gsm paper
ranging in size from 3.5
ranging in size from 3.5
×
5.5" to 8.5
×
14"/ A6 to 216
×
356mm.
Load special stock as follows:
Predrilled paper: holes toward the rear of the copier.
Letterhead paper: face down with the top toward the left.
Envelopes: flap side up and toward the rear, one at a time.
Labels: face down, one at a time.
Transparencies: removable stripe face up and toward the rear, one at a
time.
Transparencies: removable stripe face up and toward the rear, one at a
time.
•
Use labels, transparencies, and envelopes specifically designed for
copiers (high temperatures).
copiers (high temperatures).
1. Place the original face down and align
it with the registration guide on the
document glass.
document glass.
2. Lower the alternate paper tray, located
on the right side of the copier.
3. Unfold the paper support extension as
shown.
4. Adjust the guides to the width of the
copy paper.
5. Insert the copy paper all the way into
the alternate paper tray until it stops (do
not force).
not force).
•
50 sheets max.
Note: When loading envelopes, labels, or
transparencies insert one at a time.
transparencies insert one at a time.
6. Press the Paper Supply button to select
the alternate paper tray.
7. Select other required features.
8. Press the Start button.