Xerox xd100 用户指南

Keeping the document glass clean helps ensure the best possible copies.
Xerox suggests that you clean the document glass at the start of each day
and during the day as needed.
CAUTION:  Do not pour or spray water directly onto any part of the copier.

1.  Slightly dampen a soft lint-free cloth or

paper towel with water.

2.  Wipe the surface of the document glass

until it is clean and dry.

3.  Wipe the underside of the white

document cover until it is clean and dry.

4.  Close the document cover.

If copies start getting streaks or blotches, the corotron wire may be dirty.

Note:  Ensure that the alternate paper tray
is lowered (XD104/ 105f/ 124f/ 155df only).

1.  Press the release latch to open the side

cover.

2.  Remove the green corotron wire

cleaner from inside the copier (near the
front corner of the machine).

3.  Insert the corotron cleaner into the

corotron wire unit.

4.  Wipe the corotron wire with the corotron

cleaning tool as shown.

5.  Replace the cleaner and close the side

cover.