Xerox 6015 用户指南
Scanning
106
WorkCentre 6015 Color Multifunction Printer
User Guide
Loading Documents for Scanning
Position the original document as shown.
Document Glass
Lift the automatic document feeder or the
document glass cover, then place the original
face down in the upper left corner of the
document glass.
Lift the automatic document feeder or the
document glass cover, then place the original
face down in the upper left corner of the
document glass.
Automatic Document Feeder
Insert originals face up with the top of
the page entering the feeder first. Adjust the
paper guides so they fit against the originals.
Insert originals face up with the top of
the page entering the feeder first. Adjust the
paper guides so they fit against the originals.
Automatic Document Feeder Guidelines
Note:
Available on WorkCentre 6015N/NI Color Multifunction Printer only.
The automatic document feeder accommodates the following originals:
Width: 148–216 mm (4.1–8.5 in.)
Length: 210–355.6 mm (8.3–14 in.)
Weight: 60–105 g/m² (16–28 lb. Bond)
Follow these guidelines when loading originals into the automatic document feeder:
Load originals face up so that the top of the document enters the feeder first.
Place only loose sheets of paper in the automatic document feeder.
Adjust the paper guides so that they fit against the originals.
Insert paper in the automatic document feeder only when ink on the paper is dry.
Do not load originals above the MAX fill line.