Xerox 6015 用户指南

下载
页码 216
Features 
 
 
WorkCentre 6015 Color Multifunction Printer 
29 
 
User Guide 
 
Wired Network Setup 
This menu provides the selections for setting up the printer for wired Ethernet network connections. 
 
Notes:
 
 
This menu is the default network menu for the WorkCentre 6015N Color Multifunction Printer. 
 
This menu appears on the WorkCentre 6015NI Color Multifunction Printer only when the 
printer is connected to a wired network connection. 
  
Item 
Description 
Ethernet 
Specifies the Ethernet communication speed and the modes. 
TCP/IP 
Specifies the TCP/IP settings for the network. 
 
IP Mode: Dual Stack or IPv4 Mode. 
 
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address 
Protocol 
Select Enable when using the protocol. Select Disable to make the protocol unavailable. 
 
LPR: The default setting is Enable. 
 
Port9100: The default setting is Enable. 
 
WSD: The default setting is Enable. 
 
SNMP: The default setting is Enable. 
 
Email Alerts: The default setting is Enable. 
 
CentreWare Internet Services: The default setting is Enable. 
 
LLTD: The default setting is Enable. 
 
Bonjour (mDNS): The default setting is Enable. 
Initialize NVM 
Initializes network data stored in non-volatile memory. After executing this function and 
restarting the printer, all network settings are reset to their default values. 
 
 
Wireless Network Setup 
This menu provides the selections for setting up the printer for wireless network connections. 
 
Note: 
This menu appears on the WorkCentre 6015NI Color Multifunction Printer when the printer is 
not connected to a wired network connection. 
  
Item 
Description 
Status 
Displays the status of the wireless network connection. 
Wireless Setup 
Specifies the method used for setting up the wireless connection: 
 
Manual Setup 
 
WPS 
Reset Wireless 
Resets the wireless network settings to the default settings. 
TCP/IP 
Specifies the TCP/IP settings for the network. 
 
IP Mode: Dual Stack or IPv4 Mode. 
 
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address