Xerox 6015 用户指南
Features
32
WorkCentre 6015 Color Multifunction Printer
User Guide
System Setup
Use this menu to configure general settings of the printer. For example, time to Energy Saver mode,
alarm settings, and so on.
Item
Description
Power Saver Timer
Specifies the transitional time for Energy Saver Modes 1 and 2.
Energy Saver Mode 1 (Low Power): 5–60 min. The default setting is 60 minutes.
Energy Saver Mode 2 (Sleep): 1–60 min. The default setting is 1 minute.
For details, see
Energy Saver Mode
on page 38.
Auto Reset
Specifies the time the printer waits for further control panel input before resetting the
Copy, Scan, or Fax settings and returning to standby mode.
Copy, Scan, or Fax settings and returning to standby mode.
Fault Timeout
You can cancel a printing process when a fault occurs while printing. Set the time until the
print job is canceled:
print job is canceled:
On: Specifies the amount of time that the printer waits for additional data before it
cancels the job. The default setting is 60 seconds.
cancels the job. The default setting is 60 seconds.
Off: Cannot cancel.
Job Timeout
You can cancel a printing process when it fails to print after a specified amount of time.
Set the time until the print job is canceled:
Set the time until the print job is canceled:
On: Specifies the amount of time that the printer waits before it cancels the job. The
default setting is 30 seconds.
default setting is 30 seconds.
Off: Cannot cancel.
Clock Settings
Specifies the date and time, and the format of the settings:
Set Date and Time.
Date Format: Select yy/mm/dd, mm/dd/yy, or dd/mm/yy.
Time Format: Select 12H or 24H format.
Time Zone: Allows you to set your time zone by geographic region.
Alert Tone
Specifies what prompts an alarm when an error occurs in the printer, and sets the sound
volume to Off, Min, Middle, or Max:
volume to Off, Min, Middle, or Max:
Panel Select Tone: The default setting is Off.
Panel Alert Tone: The default setting is Off.
Auto Clear Alert: The default setting is Off.
Job Tone: The default setting is Middle.
Alert Tone: The default setting is Middle.
Out of Paper: The default setting is Middle.
All Tones: The default setting is Off.
mm/inch
Set the units for the custom paper size to millimeters or inches.
Millimeter (mm): The paper size is displayed in millimeters. The default setting is mm.
Inch ("): The paper size is displayed in inches.
Low Toner Alert Msg
Turns the Low Toner alert message On or Off.
Power On Wizard
Turns the Power On Wizard On or Off.