Xerox 2101 用户指南
5.3 Selecting Paper Tray
93
Making Copies
Added
Fe
atures
atures
Basic
Features
Image
Quality
Stored Job
Templates
Output
Format
3
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
then press Start on the control panel.
Copies will be made.
●
●
●
5.3.2
Manually Selecting Paper Tray
The following procedure describes how to select a paper tray loaded with the desired paper size
for copying. Options available are:
for copying. Options available are:
● When the optional high capacity feeder is installed, select Tray 6 (HCF).
Tray 1, Tray 2, Tray 3, Tray 4
Select a paper tray loaded with the desired paper size.
Tray 5 (Bypass)
Select this for paper that cannot be loaded in tray 1, 2, 3, and 4.
■
Selecting trays 1, 2, 3, or 4
To select a paper tray from trays 1, 2, 3, or 4 that is loaded with your desired paper size.
● When paper is not loaded in the selected tray or when the orientation of the document and the paper for copying differs, a
message will be displayed. Follow the instructions to proceed.
Procedure
1
Load the documents.
2
From Paper Supply, select the paper tray with the desired
paper size.
paper size.