Xerox 2101 用户指南
99
Making Copies
Added
Features
Basic
Features
Image
Quality
Stored Job
Templates
Output
Format
5.5
Stapling
This feature allows you to output copies collated and stapled by sets. Copies are output
offset and can be stapled in two positions.
The number of sheets that can be stapled is 2 to 50 (FX P paper) using the staple cartridge for 50 sheets
(optional) and 2 to 100 (FX P paper) using the staple cartridge for 100 sheets. The maximum number of sheets
for stapling is 65 for standard-sized paper longer than 8.5×11", or for non-standard size paper with a 216 mm
edge parallel to the feeding direction.
offset and can be stapled in two positions.
The number of sheets that can be stapled is 2 to 50 (FX P paper) using the staple cartridge for 50 sheets
(optional) and 2 to 100 (FX P paper) using the staple cartridge for 100 sheets. The maximum number of sheets
for stapling is 65 for standard-sized paper longer than 8.5×11", or for non-standard size paper with a 216 mm
edge parallel to the feeding direction.
● Suitable paper sizes for stapling and staple positions
The following paper sizes and positions are suitable for stapling:
● Document orientation
Follow the diagram below for loading documents in the Head to Left orientation:
Follow the diagram below for loading documents in the Head to Left orientation:
Position
Paper Size
Top Left×1
Top Right×1
Top×2
Left×2
Right×2
A4 portrait
B5 portrait,
16K portrait,
8×10" portrait,
8.5×11" portrait
A3
A4,
8.5×11", B4,
8.5×13",
8.5×14",
11×17", 8K
Output
Optional
On the document glass
In the DADF