Xerox 2101 用户指南
385
Daily Care
10.6
Emptying Punch Scrap
Container
Container
The message below will be displayed when it is time to empty the punch scrap container.
Discard the scraps when the message is displayed.
When pulling the punch scrap container out to dispose the punch scraps, ensure that all the scraps are
discarded. If there are scraps remaining, the container may be full before the next message is displayed, and
this may cause machine breakdown. Remove the container while the power is on.
If you switch off the power when emptying the scraps box, the machine will not be able to detect that the scraps
have been disposed.
Discard the scraps when the message is displayed.
When pulling the punch scrap container out to dispose the punch scraps, ensure that all the scraps are
discarded. If there are scraps remaining, the container may be full before the next message is displayed, and
this may cause machine breakdown. Remove the container while the power is on.
If you switch off the power when emptying the scraps box, the machine will not be able to detect that the scraps
have been disposed.
Procedure
1
Open the right door of the
finisher.
finisher.
2
Pull out the punch scrap
container R4 in the
direction indicated by the
arrow.
container R4 in the
direction indicated by the
arrow.