Xerox 2101 用户指南
392
$
Appendix
Α
Specifications
The following is a list of main specifications of the 2101. Changes to specifications and the appearance of the
product may be made without prior notice.
product may be made without prior notice.
■
Standard specifications
Copier Type
Console
Copying Method
Indirect electrostatic
Development Method
Dry development
Document Table Type
Fixed
Photosensitive Type
Organic photosensitive conductor (OPC)
Fusing System
Heat roller
Scanning Method
CCD scanning in main direction
Scanning Resolution
Fast scan: 400 dpi (15.7 dots/mm)/8 bit
Slow scan: 400 dpi (15.7 dots/mm)/8 bit
Slow scan: 400 dpi (15.7 dots/mm)/8 bit
Memory Resolution
Fast scan: 600 dpi (23.6 dots/mm)/1 bit
Slow scan: 600 dpi (23.6 dots/mm)/1 bit
Slow scan: 600 dpi (23.6 dots/mm)/1 bit
Warm-Up Time
(For 200 V model)
(For 200 V model)
Within 6 min (room temperature: 20°C
(Within 120 sec (room temperature 20°C): after exiting the Power Saver Mode (1 hour))
(Within 120 sec (room temperature 20°C): after exiting the Power Saver Mode (1 hour))
Document Size
Document glass: Max: 297×432 mm, Min: no limit
DADF: Max: 297×432 mm, Min: 148×210 mm
DADF: Max: 297×432 mm, Min: 148×210 mm
Copy Paper Size
Tray 1
: A4 portrait, A5
*1
, B5 portrait
*1
, 8.5×11" portrait
*1
Tray 2,3,4
: B5, B5 portrait, A4, A4 portrait, B4, A3, 8×10" portrait, 8.5×11" portrait,
8.5×11", 8.5×13", 8.5×14", 11×17", 12×18"
*2
, 8 K, 16 K, non-standard sizes
(Y direction: 182 to 297 mm, X direction: 182 to 432 mm)
*2
Tray 5 (bypass)
: [standard size]
postcard, A5, B5, A4, A4 portrait, B4, A3, SRA3 (320×450 mm/12.6×17.7")
*3
,
5.5×8.5", 8×10" portrait, 8.5×11" portrait, 8.5×11", 8.5×14", 11×17", 12×18"
*3
[non-standard size]
Y direction: 148 to 297 mm, X direction: 200 to 432 mm
Y direction: 148 to 297 mm, X direction: 200 to 432 mm
*1,2 Contact our Customer Support Center.
*3
*3
When copying onto paper size SRA3(320×450mm/12.6×17.7") and 12×18", adjust the paper guide in
the tray before loading the paper.
the tray before loading the paper.
Copy Paper (G.S.M)
Tray 1
: 56, 64 to 105 g/m
2
Tray 2,3,4
: 56, 64 to 128 g/m
2
Tray 5 (bypass)
: 56, 64 to 220 g/m
2
Use the recommended paper. Follow the instruction described in “Chapter 2 Loading Paper”.
Image Loss
Lead edge 4mm or less, Trail edge 4mm or less, Both edge 4mmm or less
First Copy Time
Document glass
: 4.2 sec (A4 portrait/Tray 1/100% magnification/1-sided copying)
DADF
: 6.3 sec (A4 portrait/Tray 1/100% magnification/1-sided copying)
Magnification
Size-for-size
1: 1 ± 0.5%
Preset R/E
1: 0.500, 1:0.707, 1:0.816, 1:0.866, 1:1.154, 1:1.224, 1:1.414
Variable R/E
1: 0.250 to 1:4.000 (at 1% increments)