Xerox 2101 用户指南
2.2 Loading Paper/Changing Paper Size of Paper Trays
33
Loading Paper
2.2.3
Loading Paper in Tray 6 (HCF)
The factory setting of the paper size is 8.5×11" or A4 portrait depending on your market area. You can
change the paper size to B5 portrait, A4 portrait, or 8.5×11" portrait.
change the paper size to B5 portrait, A4 portrait, or 8.5×11" portrait.
● Tray 6 is optional.
● For details on the type of paper that can be loaded in tray 6 (HCF), refer to “2.1 Paper to Use”.
● For details on the type of paper that can be loaded in tray 6 (HCF), refer to “2.1 Paper to Use”.
Procedure
1
Pull tray 6 (HCF) out right
to the end.
to the end.
The bottom plate is lowered
automatically.
automatically.
2
Load the paper, aligning to
the right side of the tray
and with the side to be
copied facing up.
the right side of the tray
and with the side to be
copied facing up.
When changing the paper size:
(1)Remove any paper in
the tray.
(2)Loosen the screw to
remove the paper
guide.
guide.
● Do not load different types of paper
in the tray. This may result in paper
jam.
jam.
● Do not load paper exceeding the
maximum fill line.
● Before changing the factory setting
of the paper size to B5 portrait,
contact your Customer Support
Center.
contact your Customer Support
Center.