Xerox 2101 用户指南

4.2

You can interrupt a current copy job to proceed with a more urgent job by pressing the Interrupt button.
Once you press the Interrupt button, the current copy job will be paused as soon as it is possible. The
interrupted copy job can be resumed once you exit the Interrupt mode.

● You cannot press Interrupt to interrupt copying for a job that is programmed ahead or is a waiting job.
● For copying with Collated selected, once the scanning of documents for copying is done and End Job is selected, the machine

● Interrupt copying cannot be done when in the Save to File, Build Job, Edit/Print File, and Scan modes, except for reprinting

● You cannot do Interrupt copying when using System Settings/Meter Check.

Press Interrupt.

The interrupt indicator lights up
and the machine stops. If you
press Interrupt when documents
are being scanned for copying or
when a copy job is being done,
the machine will enter the
interrupt mode with the indicator
light blinking. Once the machine
stops, the light is lit.

Load the document for the interrupt copy job, and specify
settings for other features if necessary.

Using the keypad, enter the number of copies desired and
then press Start on the control panel.

The documents will be scanned for copying and the copies output onto the
output tray.

● Up to 1,000 pages of A4-sized