Xerox 2101 补充手册

To set the subnet mask, enter one of the following values:

•

255.0.0.0

 if the IP address starts with a number less than 128

•

255.255.0.0

 if the IP address starts with a number from 128 through 191

•

255.255.255.0

 if the IP address starts with a number greater than 191

Confirm the subnet mask setting with your network administrator before 

proceeding. In some cases, the required setting may be different from those listed.

If your TCP/IP network has a gateway and users outside the gateway plan to print to 
the Fiery EX2101 using TCP/IP, enter the gateway address.

The Fiery EX2101 stores assigned IP addresses, even if you later disable TCP/IP. 

If you need to assign the Fiery EX2101 IP address to another device, first set the 
Fiery EX2101 address to a null address.

You can configure the following network services:

—enable or disable LPD 

print services.

—specify NDS and Bindery services 

(see 

).

—enable or disable SMB 

print services.

—enable or disable SNMP services (Local Setup only)

—enable or disable support for Fiery 

WebTools and IPP printing.

—enable or disable support for Port 9100 

printing.

—specify the Fiery E-mail Service.