Xerox 2101 补充手册

To use the Fiery EX2101 Font Archiving feature, you must connect a USB compatible 
external ZIP drive to the Fiery EX2101. Connect the power cable to your ZIP drive, 
and the USB cable to your ZIP drive and to one of the USB connectors on the back 
panel of the Fiery EX2101. For the location of the USB connectors, see 

 on page 1-10. It is not necessary to install the device driver; it is 

included in your Fiery EX2101. 

If your ZIP drive is USB 2.0 compatible, a warning message is displayed on the 

FACI.

Insert a ZIP disk. Now you are ready for Font Archiving (see 

Generally, you can leave the Fiery EX2101 running all the time. This section describes 
how to shut down and restart the Fiery EX2101 when necessary.

To start the Fiery EX2101, move the power switch on the back of the Fiery EX2101 to 
the On position. If the copier is also turned off, turn it on before turning on 
the Fiery EX2101.

To access the FACI, if installed, you must enter the user name and the password at the 
FACI. The user name is 

Administrator

, and the default password is “

Fiery.1

”. 

To turn the Fiery EX2101 back on after you turned it off, wait at least 10 seconds.

Hide FieryBar

Hides FieryBar. To show FieryBar after hiding it, right-
click the Fiery icon on the right side of the Windows 
taskbar and choose Show FieryBar from the menu that 
appears.