Xerox 4250c 用户指南
10
Paper and other Media
158
Xerox WorkCentre 4250/4260 User Guide
4.
Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max Fill Line.
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max Fill Line.
5.
The UI screen shows the current paper supply settings for the Bypass Tray on
the right hand side. Select the Size, Type and/or Color buttons if necessary to
change the settings. If the settings are correct, select the Confirm button.
Please refer to Setting the Paper Size in the Paper and other Media chapter on
page 160.
the right hand side. Select the Size, Type and/or Color buttons if necessary to
change the settings. If the settings are correct, select the Confirm button.
Please refer to Setting the Paper Size in the Paper and other Media chapter on
page 160.
Envelope Mode
1.
Lower the bypass tray, located on the right side of the product and unfold the
paper support extension.
paper support extension.
Remove any curl on
envelopes before loading
them into the Bypass Tray.
them into the Bypass Tray.
2.
Prepare a stack of envelopes for loading by flexing or fanning them back and
forth. Straighten the edges on a level surface.
forth. Straighten the edges on a level surface.
Paper Guide
Max Fill Line