Xerox 4250c 用户指南

Select Off to send the fax immediately. 

Select Specific Time to enter the time you wish the fax to be sent. Enter the hours 
and minutes separately and select AM or PM to denote if you want the fax to be 
sent in the morning or the evening.

Select On to enable transmission header details on outgoing faxes. To format 
Transmission Header details, refer to Transmission Header Text in the Setups 
chapter on page 171.

Mailboxes are areas of machine memory where incoming faxes are stored or from 
which outgoing faxes can be polled (see Polling – page 75). The System 
Administrator can set up to 200 mailboxes on your machine.

You can use a mailbox located on the same machine you are using (local mailbox), 
or a mailbox set up on a remote machine (remote mailbox).

Local mailboxes can contain both stored or received documents. Stored 
documents are placed in the local mailbox by the user standing at the device; 
received documents are placed in the local mailbox by a remote fax device. The 
local mailbox may be password protected and a local user can delete or print the 
contents of the mailbox. 

Documents held within the local mailbox are recognized as stored for polling, 
printing or deleting by the user. To access a mailbox you must enter the 3 digit 
mailbox number and, if applicable, a 4 digit mailbox passcode. Please contact your 
System Administrator for more information. 

The storage time for faxes is set up by your System Administrator.

Allows users to scan and store fax documents for polling. Documents are stored in 
your mailbox and automatically sent to a remote fax machine when requested. 

Enter Mailbox number (max 20 digits).

Enter Mailbox passcode (4 digit code).

Press Start.

Allows you to print a hard copy of the documents stored in a mailbox. 

Enter Mailbox number (max 20 digits).

Enter Mailbox passcode (4 digit code).

Press Start.