Xerox 3320dni 用户指南

Loading Paper

Xerox Phaser 3320DN/3320DNI
User Guide

66

Loading Paper

One paper tray and a bypass tray are standard on your machine. Paper tray 2 is available to purchase 
as an option.

Various media sizes and types can be used in the trays. For more media specifications, refer to 

Media 

Guidelines and Specifications 

on page 71 and 

Media Specifications 

on page 119.

Preparing Paper for Loading

Before loading paper into the paper trays, flex or fan the 
edges of the paper stack. This procedure separates any sheets 
of paper that are stuck together and reduces the possibility of 
paper jams.

Note:

To avoid unnecessary paper jams and misfeeds do 

not remove paper from its packaging until required.

Loading Paper Tray 1 and Paper Tray 2 (optional)

The paper level indicator on the front of tray 1 and the 
optional tray 2 shows the amount of paper currently left in 
the tray. When the tray is empty, the indicator is completely 
lowered as shown in the illustration:

shows full, 

shows empty.

Using the instructions provided below, load paper into the 
machine. Paper tray 1 can hold up to 250 sheets and paper 
tray 2

 (optional) can hold up to 520 sheets of 20 lb (80 g/m²) 

paper. For more media specifications, refer to 

Media 

Guidelines and Specifications 

on page 71 and 

Media 

Specifications 

on page 119.

1.

Pull out the paper tray and load paper into the tray, print 
side down. Do not fill above the Maximum Fill line 
indicated by the symbol

.