Xerox 4260s 用户手册

The WorkCentre 4260 X and XF Series configuration has Fax installed as standard. 
The Fax Kit will require setup when the machine is installed.

Set up the Fax Kit using the instructions in the Kit.

Connect the telephone line to the 
Line

 connector on the device.

If you wish to attach a handset to 
the device, connect the handset to 
the Ext. connector.

Press the Log In/Out button on 
the Control Panel, enter the 
Administrator’s Password [1111] 
and select Enter.

Press the Machine Status button 
then select Tools > User 
Interface > Service 
Enablements > Embedded Fax. 
The Fax Install Screen will appear.

Select the required (or nearest) country location by selecting the entry in the Country 
Setup

 list and select Next.

Select the required dialing method. For a tone line select Tone. For a 10 pulse per 
second line select Pulse. If in doubt, select Tone.

Select the keypad symbol for Fax Number and enter the fax telephone number for 
the device.

Select the keypad symbol for Machine Name and enter a custom name for the 
device.

Select Save and Close. The device will reboot. The machine will now send and 
receive fax transmissions using default settings. If you wish to change the Fax Setup 
enter the Tools Pathway as described in steps 4 and 5 and select Tools > User 
Interface > Fax Service Settings. The various Fax options can be selected and 
changed.

Line

connector

Handset (Ext.)

connector