Xerox 6505n 用户指南

Printing

WorkCentre 6505 Color Laser Multifunction Printer

User Guide

87

Printing Custom Sizes

This section includes:
•

•

Note: 

Custom size paper can be loaded into all trays.

Defining Custom Paper Sizes

This section includes:
•

•

•

•

Notes: 

•

The custom size defined must be within the maximum and minimum size range for the 
printer paper tray you are using. For details, see the custom size paper ranges given for 
each tray in 

•

You can create custom paper sizes for use with both the PostScript and PCL print drivers, 
but the method for each is different. For optimum results, follow the instructions 
carefully.

•

If you get an error message when creating a custom size, you might not have permission 
to save custom paper sizes on your computer. See your system administrator for help.

Note: 

You can save only one custom paper size at a time as you print. Once saved, the dimensions 

are retained until you change them. To create a custom paper size for the PostScript driver and 
save it under a unique name for repeat use, see 

To define a custom paper size using the PostScript print driver:
1.

Navigate to your printer directory or list, then right-click the WorkCentre 6505 PS driver and 
select Properties. 

2.

In the Properties dialog box, click the Printing Preferences button.

3.

On the Paper/Output tab, from the Paper Size list, select Custom Page Size.

4.

In the PostScript Custom Size Settings dialog box, select the units of measurement to use. 

5.

In the Custom Size Settings section, specify the size for the short edge (width) and the long edge 
(length) of the paper, then click OK.

6.

In the Printing Preferences dialog box, click OK.

Note: 

To change the custom size, in the Paper/Output tab, click the Edit button below the Paper 

Size field. Make the desired changes, and save your changes in all applicable dialog boxes.