Xerox 7100n 用户指南

下载
页码 140
Troubleshooting 
 
94 
Phaser 7100 Color Printer 
 
User Guide 
 
The way the printer was installed on the 
network could be an issue. 
•  Ensure that the printer is connected to the network. 
•  Determine if a print spooler or a computer sharing the printer is 
buffering all print jobs and then spooling them to the printer. 
Spooling can slow print speeds. 
•  To test the printer, print some information pages such as the 
Demo Page. If the page prints, you could have a network or 
printer installation issue. For additional help, contact the system 
administrator. 
Application and print driver have conflicting 
tray selections. 
For details, see 
Document Prints from Wrong Tray
 on page 94. 
  
 
Document Prints from Wrong Tray 
 
Probable Causes 
Solutions 
Application and print driver have conflicting 
tray selections. 
1.  Check the tray selected in the print driver. 
2.  Go to the page setup or printer settings of the application from 
which you are printing. 
3.  Set the paper source to match the tray selected in the print 
driver or set the paper source to Automatically Select. 
  
 
Automatic 2-Sided Printing Problems 
 
Probable Causes 
Solutions 
Unsupported or incorrect paper. 
Ensure that you are using a supported paper size and weight for 2-sided 
printing. Envelopes and labels cannot be used for 2-sided printing. For 
details, see 
Supported Paper Sizes and Weights for Automatic 2-Sided 
Printing
 on page 40. 
The printer does not support automatic 
2-sided printing. 
Ensure that your printer supports automatic 2-sided printing. For details, 
see 
Printer Configurations and Options
 on page 120. 
Incorrect setting. 
In the print driver Properties, on the Printing Options tab, select 
2-sided 
Printing
 
 
Printer is Making Unusual Noises 
 
Probable Causes 
Solutions 
One of the trays is not installed correctly. 
Open and close the tray from which you are printing. 
There is an obstruction or debris inside the 
printer. 
Turn off the printer and remove the obstruction or debris. If you 
cannot remove it, contact your Xerox
®
 service representative.