Xerox 5500 用户指南

To print the “Startup Page”:

Select 

, then press the OK button.

Select 

, then press the OK button.

Select 

, then press the OK button to print.

When your print job is formatted for a type or size of paper that is not loaded in the printer, the 
printer’s front panel displays a message requesting you to load the appropriate paper. The Load 
Paper Timeout controls the amount of time the printer waits before printing on another type or 
size of paper.

To change the load paper timeout, use either:

■

The printer’s front panel

■

CentreWare IS

To change the load paper timeout:

1. Select 

, then press the OK button.

2. Select 

, then press the OK button.

3. Select 

, then press the OK button.

4. Scroll to the desired timeout value. The values (

, 

,

, 

, or 

 minutes, 

 hour or 

 hours) indicate the length of time you want the printer to wait for you to load paper 

before printing. If you select a value of 

, the printer does not wait for paper to be 

inserted and immediately picks paper from the default tray.

5. Press the OK button to save the change.

To change the load paper timeout:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Select Properties.

4. Select the General folder on the left sidebar.

5. Select Printer Defaults. 

6. Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None, 

1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to 
wait for you to load paper before printing. If you select a value of None, the printer does 
not wait for paper to be inserted and immediately picks paper from the default tray.

7. Click Save Changes at the bottom of the screen.