Xerox 5500 用户指南

Close Door G.

Depending on your region, the optional finisher is factory configured with either a 3-hole 
punch or a 2- / 4-hole punch. To determine which option is installed on your printer, print a 
Configuration Page from the front panel.

■

When the hole punch option is turned on, sheets that are sent to the Stacker Upper Tray or 
the Stacker Lower Tray are punched. 

■

When the hole punch option is turned off, no paper is punched.

■

When the 2-hole and 4-hole punch is installed and enabled, and Punch Holes is set to 2, 
two holes are punched in the paper.

■

When the 2-hole and 4-hole punch is installed and enabled, and Punch Holes is set to 4, 
four holes are punched in the paper.

■

When the printer detects that the punch waste box is full, a warning appears on the front 
panel, and printing continues without punching.

The hole punching option is selected through the front panel, the printer driver, or through 
CentreWare IS.

At the printer’s front panel, select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button to toggle it on or off.

If you have a 2-hole and 4-hole punch, then set Punch Holes to 2 or 4.

5500-018