Xerox 5500 用户指南
Transparencies
Phaser® 5500 Laser Printer
2-47
2.
Insert the transparencies long-edge feed into Tray 1 (MPT) or Tray 6.
Note
Do not load paper above the fill line inside the tray.
3.
Adjust the paper guides to the size of the transparencies if necessary.
4.
If prompted at the printer’s front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select
Change
, then press the OK button.
b.
Select
Transparency
, then press the OK button.
c.
Select the paper size, then press the OK button to save your selection.
5.
In the printer driver, select either Transparency as the paper type or the tray you loaded as
the paper source.
the paper source.
Printing Transparencies from Trays 2-5
1.
Fan the transparencies to release sheets that may stick together.
Tray 1 (MPT) Long-Edge Feed
Tray 6 Long-Edge Feed
5500-142
MAX
5500-118
5500-170