Xerox 5550 用户指南

Several stapling options are available in the Phaser 5550 printer driver:

■

No Stapling: This is the default option. When selected, prints are not stapled.

■

1 Staple: Inserts one staple in each set of copies. 

■

2 Staples: Inserts two staples in each set of copies. 

■

Advanced Stapling: Provides options for controlling staple placement.

To select a stapling option in a supported driver:

You can use the control panel or CentreWare IS to set the default stapling option.

When the printer detects a low quantity of staples, a 15 minute delay is started during which 
three things can happen:

■

The print job can be resumed without staples.

■

The user can refill the staple cartridge, and then continue the print job.

■

The print job can be cancelled.

If no action is taken by the end of the 15 minutes, the print job will resume, run the staples out, 
and continue to print without stapling. 

On the Output Options tab, select an option from the Stapling 
drop-down list.

In the Print dialog box, select Finishing Options from the drop-down 
list, and then select the stapling option.