Xerox 5550 用户指南

The Phaser 5550 printer has one standard output tray and two optional ones:

■

Standard Output Tray: Sends prints to the Standard Output Tray on top of the printer.

■

Stacker Upper Tray: Sends prints to the Stacker Upper Tray on the right side of the 
printer. This tray is available with the optional finisher or stacker.

■

Stacker Lower Tray: Sends prints to the Stacker Lower Tray on the right side of the 
printer. This tray is available with the optional finisher or stacker.

To select the output tray:

On the control panel, select 

, select 

, and then select 

.

Select either 

, 

, or 

, and 

then press the OK button.

The printer driver overrides the control panel settings for output tray selection.

The Stacker Lower Tray and Standard Output Tray can place sheets in alternate positions to 
separate one print job from another. This is called job offsetting. There are several job 
offsetting options from which to choose:

■

Off: No job offsetting occurs and the output position is not changed for the output tray 
selected.

■

On: The output position changes after the final sheet of the print job is printed. The next 
print job is then offset to keep it separate from the previous print job.

When the stapling option is used for print jobs, job offsetting is activated. 

To select the job offset option:

On the control panel, select 

, and then press the OK button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Press the OK button to switch between 

 and 

.