Xerox 5550 用户指南

Connect the printer via Ethernet, USB, or parallel. A USB or a parallel connection is a direct 
connection and is not used for networking. An Ethernet connection is used for networking. 
Hardware and cabling requirements vary for the different connection methods. Cabling and 
hardware are generally not included with your printer and must be purchased separately. This 
section includes:

■

■

■

Ethernet can be used for one or more computers. It supports many printers and systems on an 
Ethernet network. An Ethernet connection is recommended because it is faster than a USB 
connection. It also allows you direct access to CentreWare Internet Services (IS). The 
CentreWare IS web interface enables you to manage, configure, and monitor networked 
printers from your desktop.

Depending on your particular setup, the following hardware and cabling is required for 
Ethernet.

■

If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 

■

If you are connecting to one or more computers with an Ethernet hub, or cable or DSL 
router, two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for 
each device.)

If you are connecting to one or more computers with a hub, connect the computer to the hub 
with one cable, and then connect the printer to the hub with the second cable. Connect to any 
port on the hub except the uplink port.