Xerox 6500dn 用户指南

Troubleshooting

Phaser 6500 Color Laser Printer

User Guide

141

Paper Jams

This section includes:
•

•

Preventing Paper Jams

To reduce the occurrence of paper jams, follow the guidelines and instructions in 

on page 46. It includes paper-usage guidelines and instructions for properly loading paper in 

the trays.

To prevent paper and other media misfeeds and printer jams, follow these guidelines:
•

Make sure that the paper used matches the specifications for each tray in the printer.

•

Stack media so that it is flat and level, especially on the leading edge.

•

Make sure the printer is on a hard, flat, level surface.

•

Store paper and other media in a dry location away from moisture and humidity.

•

Always adjust the paper guides in Tray 1 after inserting the media. A guide that is not properly 
adjusted can cause poor print quality, paper misfeeds, and printer damage.

•

Avoid using paper that is folded, wrinkled, or excessively curled.

•

Avoid double feeding. Remove the paper and fan the sheets to prevent them from sticking 
together.

•

Do not load more than one type, size, or weight of paper in a tray at the same time.

•

Do not overfill the trays.

•

Do not allow the output tray to overfill; misfeeding can occur if you allow too many sheets of paper 
to accumulate at one time.

When removing jammed paper, make sure that no pieces of torn paper 

are left in the printer. If a sheet of paper is wrapped around the heat roller, do not 
try to remove it. Power off the printer using the power switch of the printer, and then 
contact Technical Support for additional assistance. Turn off the printer to remove 
jammed paper that is difficult or impossible to see. 

The fuser and the surrounding area are hot and can cause burns.