Xerox 6500dn 用户指南

Printing

Phaser 6500 Color Laser Printer
User Guide

82

Automatic 2-Sided Printing

You can perform automatic 2-sided printing from Tray 1 and, if installed, the 250-sheet feeder (Tray 2).

To perform automatic 2-sided printing:
1. Insert the paper into the desired tray. For more information, see 

2. In the print driver, select 2-sided printing:

•

Windows users: In the Paper/Output tab, from the 2-Sided Print drop-down list, select either 
Flip on long edge or Flip on short edge.

•

Macintosh users: In the Print dialog box, from the Presets menu, select Layout. Then select 
either Long-edged printing or Short-edged printing.

For details, see 

on page 81.

3. Select any other desired printing options and then click OK and then click OK again (or Print) to 

start printing.

Note: 

For optional printer features to be available in the print driver dialogs, the optional features 

must be installed and enabled. If you have not enabled your installed optional features, see 

Manual 2-Sided Printing

This section includes:
•

•

If you do not have the optional duplex unit installed, you can still print on both sides of some paper 
using the following instructions. You can also use this procedure for printing on paper incompatible 
with the duplex unit.

Notes: 
•

This method of manual 2-sided printing is only available using the PCL print driver.

•

Do not perform manual 2-sided printing on cardstock or glossy cardstock using this method.

1. Load Tray 1 with the desired paper acceptable for use in Tray 1. For details, see 

Use only paper specified for use with this printer. Damage caused by 

unsupported paper is not covered under the Xerox

®

 Warranty, Service Agreement, or 

Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the 
United States and Canada. Coverage can vary outside these areas. Please contact 
your local representative for details.