Xerox 123 参考指南

This chapter describes how to use the scan features. For more information on the 
specific types of scan, refer to the following.
To scan and e-mail documents – User Guide

After a document is scanned, scanned data is automatically sent to specified 
destinations as an e-mail attachment.

Scanned documents are saved in a specified mailbox on the machine.

According to the settings in a selected scan job template, documents are scanned, 
processed, and then uploaded to a specified server.

After a document is scanned, scanned data is automatically uploaded to a specified 
destination using the FTP or SMB protocol.

NOTE: To use the scan features, the machine must be set up on a network. For more 
information refer to the Quick Network Setup Guide and the System Administration 
Guide.

NOTE: Some of the features described in this chapter are optional and may not apply 
to your machine configuration.

This section describes the basic scanning procedures. Follow the steps below.
1. Load the Documents – page 76
2. Select the Features – page 76
3. Start the Scan Job – page 77
4. Confirm the Scan Job in the Job Status – page 77
5. Save the Scanned Data – page 77
Stop the Scan Job – page 78