Xerox 123 软件指南

NOTE: You cannot use staples in the following situations.

– When anything other than Finisher Tray is selected for Output Destination in the 

Advanced tab.

– When Job Offset is selected.

Bypass Feed Orientation - Specifies the paper orientation when printing from the bypass tray. 
When feeding the short edge of the paper first, select [Landscape]. When feeding the long edge 
of the paper, select [Portrait].
Offset Stacking - The position of individual jobs or sets of copies are shifted to either side of 
the output tray to enable easy separation.
Feed Separators from - Specifies the paper tray that transparency dividers are to be fed from. 
When [Auto] is selected, the tray set on the machine is used as the feed destination.
Print on Separators - Specifies whether or not to print on the transparency dividers as well as 
the transparency.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Collated - Selects whether to collate a multiple-page file per set when they are printed.
Halftone - Select the halftone settings for printing.
Select [Fine Dots] for the small size halftone dot commonly used in PostScript.
Select [Thick Dots] for coarser dots than the Fine Dots setting.
Select [Type 3] for the same halftone setting that is used in PCL.
Custom Paper Auto Orientation - Specifies whether or not to correct the orientation of the 
custom paper.
Substitute Tray - Specifies what action to take when the paper for the print size is not loaded 
in the machine.

Use Printer Settings - Use the printer settings. The settings can be confirmed on 
the control panel.
Display Message - Display paper supply messages on the control panel. Printing 
is impossible until paper is supplied.
Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically 
adjusts the image size as necessary.
Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same 
size as the image.
Use Larger Size (Adjust to Fit) - Selects paper larger than the original and 
automatically adjusts the image size as necessary.
Use Larger Size (No Zoom) - Selects paper larger than the original and prints the 
same size as the image.
Feed from Bypass Tray - Feed from bypass tray.

Print Mixed Size Originals - Controls the orientation of the second-side image when printing 
double-sided.
Available Printer Memory - Enter the amount of usable printer memory (in KB) in the Edit box. 
Usually, it is not necessary to change this.
Available Font Cache - Enter the amount of memory available for the font cache (in KB) in the 
Edit box. Usually, it is not necessary to change this.
Account Mode - Specifies if all users or only System Administrators can change authentication 
related settings.