Xerox 123 用户手册

This chapter, aimed for the Key Operator, describes how to change various defaults 
preset on the machine, how to register various items such as mailboxes and 
destinations, and how to configure or change Key Operator settings.

This section describes the basic system settings procedure. Follow the steps below.
1. Entering the System Settings Mode – page 189
2. Customizing the Settings – page 190

Press the <Log In/Out> button 
on the control panel.

Enter the correct user ID using 
the numeric keypad on the 
control panel or the screen 
keyboard. For information on 
keyboard entry, refer to 
Keyboard in the Fax/Internet 
Fax chapter on page 83.

NOTE: The default Key Operator ID is “11111”. If the Authentication feature is 
enabled, you may be also required to enter a password. The default password is “x-
admin”. To change the default user ID or password, refer to System Administrator 
Settings on page 256.

Select [System Settings] on the 
[System Administrator Menu] 
screen.

NOTE: In [User Mode], you can 
operate the machine normally while 
logged in as the Key Operator.

<Log In/Out> 
button