Xerox 123 用户手册

Sleep Mode
The machine automatically switches to the Sleep Mode after the Low Power Mode 
continues for a certain period of time. The Sleep Mode has a reduced power 
consumption compared to Low Power Mode. In this mode, the touch screen is turned 
off, and the Power Saver light is on. The Sleep Mode is cancelled when the <Power 
Saver> button is pressed, or a fax or print job is received by the machine. The factory 
default setting of 15 minutes is customer changeable within the range of 2 to 60 
minutes. The time specified for entering the Sleep Mode will be counted from when the 
machine enters the Low Power Mode.
For more information, refer to Auto Power Saver in the Setups chapter on page 192.
NOTE: By default, the machine skips the Low Power Mode and switches directly to 
the Sleep Mode after 15 minutes of inactivity.

This section describes how to change the default time settings using the Key Operator 
access. If you need assistance or more information, contact the Key Operator or refer 
to Machine Clock/Timers in the Setups chapter on page 191.

Press the <Log In/Out> button 
on the control panel.

Enter the Key Operator ID using 
the numeric keypad on the 
control panel. Select [Confirm] 
on the [System Administrator 
Login] screen.

NOTE: The default Key Operator ID 
is “11111”. If the Authentication 
feature is enabled, you may be 
required to enter a password. The 
default password is “x-admin”. The 
password is case sensitive.

<Log In/Out> button