Xerox C118 用户指南

NOTE: If you wish to filter access to the machine from the client computers, activate 
the IP Filter. The [Filter] screen is located in the same layer as the [TCP/IP Settings] 
screen.

Install print drivers on each client workstation that will be sending print jobs to the 
machine, and map to the machine as a printer. Refer to the HTML documentation in 
CentreWare Utilities CD-ROM or documentation provided with the optional PostScript 
Kit.

To make sure that the machine has been installed on the network correctly, a test print 
should be submitted from a client workstation. Perform the following steps.

Open a document on a client workstation.

Select the machine as the printer to which the selected document will be sent.

Print the document on the machine and verify that it prints correctly.

Make sure that the driver is installed on every workstation that will be sending jobs 
to the machine.

Repeat the test for all workstations that will be sending jobs to the machine.

The installation process is now complete.

If the test print fails, refer to the Problem Solving chapter for assistance.