Xerox C165 参考指南
Quick Reference Guide
Page 11-11
T
roubleshooting
Output does not reflect the selections made on the
Touch Screen
Touch Screen
¾
Press Clear All between jobs.
¾
If a Save button displays on the touch screen, ensure Save is selected after
each selection.
each selection.
Fax
The image is reduced on a transmission
¾
Confirm the original size of the documents. Documents may be reduced on the
available paper supply at the receiving fax machine.
available paper supply at the receiving fax machine.
The machine does not answer incoming calls
¾
Change the Automatic Answer Delay setting to 0 seconds. Refer to the Training
and Information CD (CD2) for further assistance.
and Information CD (CD2) for further assistance.
The machine answers calls but does not accept
incoming data
incoming data
¾
If the job contains several graphics, the machine may not have enough memory.
The machine will not answer if memory is low.
The machine will not answer if memory is low.
¾
Remove stored documents and jobs and wait for existing jobs to complete. This
will increase the available memory.
will increase the available memory.
Fault Messages will not clear
¾
There may be occasions when a fault is cleared but the message will not clear.
Reboot your machine by powering OFF and ON using the ON/OFF switch at the
side of the machine.
Reboot your machine by powering OFF and ON using the ON/OFF switch at the
side of the machine.
CAUTION: Wait approximately 20 seconds before turning the machine back
ON. Any incomplete jobs in the queue will be lost.
ON. Any incomplete jobs in the queue will be lost.
CAUTION: Use only the ON/OFF switch to reboot your machine. Damage may
occur to your machine if power is removed by other means.
occur to your machine if power is removed by other means.