Xerox C118 软件指南

This section describes the settings of Printer Features in the Advanced tab.
Select the items from Printer Features under Document Options of the Advanced tab 
and change the settings in the Change Setting box at the bottom of the tab.

NOTE: The settings that can be selected vary depending on which options have been 
installed. Change these settings only after confirming that the option settings are 
complete. See Device Settings Tab Settings on page 18.

Offset Stacking - The position of individual jobs or sets of copies are shifted to either 
side of the output tray to enable easy separation.
Feed Separators from - Specifies the paper tray that transparency dividers are to be 
fed from. When [Auto] is selected, the tray set on the machine is used as the feed 
destination.
Print on Separators - Specifies whether or not to print on the transparency dividers as 
well as the transparency.
Paper Type (Separators) - Specifies a paper type for the transparency divider.
Bypass Feed Orientation - Specifies the paper orientation when printing from the 
bypass tray. When feeding the short edge of the paper first, select [Landscape]. When 
feeding the long edge of the paper, select [Portrait].