Xerox 240 安装指导
Page 2
Apple Macintosh (AppleTalk) Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
Xerox Document Centre 240/255/265 LP/ST
Go to the workstation and...
1.
Use the
CentreWare Network Services
CD-ROM (CD-ROM 2) to install print driv-
ers and the Macintosh Naming Utility on
the workstation. Details for this are found
in the document supplied with your printer
entitled
ers and the Macintosh Naming Utility on
the workstation. Details for this are found
in the document supplied with your printer
entitled
Getting Started with Print and
Fax Services.
2.
Send a test job to the printer from an
application program.
application program.
3.
Check your test job for quality and use the
problem solving section of the
problem solving section of the
Document
Centre 240/255/265 Reference Guide for
resolving print defects.
resolving print defects.
4.
If your job did not print see the
Troubleshooting section of the
Troubleshooting section of the
Network
Installation and Troubleshooting Guide.
5.
Wait a MINIMUM of 7 minutes for the
printer to reset.
printer to reset.
a)
Obtain a
Configuration Report page
from your printer.
b)
Review the
AppleTalk Settings: area
of the
Configuration Report page
and verify that
AppleTalk is enabled,
the
AppleTalk Name is correct, the
AppleTalk Zone is correct (if used).
c)
From the documentation package
supplied with your printer, retrieve the
CentreWare Network Services CD-
ROM (CD-ROM 2) and the document
entitled
supplied with your printer, retrieve the
CentreWare Network Services CD-
ROM (CD-ROM 2) and the document
entitled
Getting Started with Print
and Fax Services. Proceed to the
next section of this procedure called
Go to a Workstation and...
next section of this procedure called
Go to a Workstation and...