Xerox 50 安装指导
T
HE
D
OCUMENT
C
OMPANY
XEROX
Xerox Document Centre ColorSeries 50 LP/ST TCP/IP Quick Install
6.
Click Apply New Settings if any changes were
made. Provide a User Name and Password
when prompted. The default User Name is
Admin with a capital “A” and the default pass-
word is 11111.
made. Provide a User Name and Password
when prompted. The default User Name is
Admin with a capital “A” and the default pass-
word is 11111.
7.
Power off and power on the printer. Allow at
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print.
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print.
8.
Continue with
Step 3 Print a Test Page.
Step 3 Print a Test Page
1.
Install the network printer driver(s) for your
workstation environment, and print a test page.
Detailed instructions for installing printer
drivers, printing a test page, and other printing
options are provided in the
workstation environment, and print a test page.
Detailed instructions for installing printer
drivers, printing a test page, and other printing
options are provided in the
Xerox Document
Centre ColorSeries 50 LP/ST Printer User
Guide.
Guide.
2.
If you have configured your printer for printing
with lpr/lpd, use a native print tool to send a
test page to the Document Centre ColorSeries
50 LP/ST.
with lpr/lpd, use a native print tool to send a
test page to the Document Centre ColorSeries
50 LP/ST.
3.
Additional information on installing the printer in
a TCP/IP environment can be found in the
Xerox Document Centre ColorSeries 50 LP/ST
Printer Installation Guide.
a TCP/IP environment can be found in the
Xerox Document Centre ColorSeries 50 LP/ST
Printer Installation Guide.
8.
Power off and power on the printer. Allow at
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The infor-
mation on the Configuration Report can be very
helpful in completing the network installation
and troubleshooting problems with your printer.
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The infor-
mation on the Configuration Report can be very
helpful in completing the network installation
and troubleshooting problems with your printer.
9.
Continue with
Step 3 Print a Test Page.
Step 2 Customize Printer Connectivity
Settings
Settings
If you use CentreWare Internet Services:
1.
At your workstation, open the Internet Explorer
or NetScape navigator browser.
or NetScape navigator browser.
2.
In the browser, enter the IP Address for the
printer and press the Enter key. The Internet
Services Home Page is displayed.
printer and press the Enter key. The Internet
Services Home Page is displayed.
3.
Click on the Properties button.
4.
Click Connectivity, Protocols, and TCP/IP to
view TCP/IP information.
view TCP/IP information.
5.
If the IP Address is Static, make sure that the
IP Address, Host Name, Subnet Mask, and
Gateway Address are set to the correct
values. If the IP Address Resolution is DHCP,
these fields will be read-only.
IP Address, Host Name, Subnet Mask, and
Gateway Address are set to the correct
values. If the IP Address Resolution is DHCP,
these fields will be read-only.
Step 2 Customize Printer Connectivity
Settings
Settings
If you use CentreWare Printer Admin Services:
1.
Install the Printer Admin Services software.
2.
Start the Printer Admin Services program.
From a workstation click Start > Programs >
Xerox CentreWare Color > Printer Admin
Services.
From a workstation click Start > Programs >
Xerox CentreWare Color > Printer Admin
Services.
3.
Enter the IP Address or select the printer that
you want to install from the list of printers. Click
TCP/IP for assistance in selecting an existing
printer name.
you want to install from the list of printers. Click
TCP/IP for assistance in selecting an existing
printer name.
4.
Click OK and then click Settings.
5.
Click on the Network tab.
6.
Review and edit any fields, if necessary. If you
enable DHCP, be sure to save the new
Configuration Report that will print approxi-
mately 5 minutes after you power off and power
on the printer, since the IP Address may have
changed. You will need the new address the
next time you access the settings.
enable DHCP, be sure to save the new
Configuration Report that will print approxi-
mately 5 minutes after you power off and power
on the printer, since the IP Address may have
changed. You will need the new address the
next time you access the settings.
7.
When you have finished entering the Settings
data, click Apply, OK and then Exit.
data, click Apply, OK and then Exit.
©1999 Xerox Corporation
701P30989 6-99
701P30989 6-99
For assistance, contact your local Xerox Customer Support Center: USA: 1-800-821-2797 Canada: 1-800-939-3769
Bustled Controller, Part Numbers 97N00893 and 97N00894 are for use with Xerox Corp. Digital Color Product Model YFA-1.