Xerox 5790 参考指南

USAGE GUIDELINES

REGAL 5790 MATERIALS USAGE GUIDE

21

Xerox Docupac Folders are designed for anyone who needs a small 
quantity of customized folders quickly and inexpensively.  This two 
sheet system consists of a front that can be custom imaged on the 
5790, and then manually attached to the back pocket portion of the 
folder.  The finished folders measure 8 3/4” x 11 3/4” and can hold 
up to 25 sheets of 20 lb bond paper.  A pocket is also included to 
display a business card.  Docupac folders are available in White, 
Gray, or Ivory and are made from 90 lb Index Stock.  Feeding and 
image quality performance will be similar to standard 8.5 x 11” 90 lb 
Index paper.

Xerox Docupac Folders (90 lb index)

White = 3R4885 Gray = 3R4927 Ivory = 3R4928

1 Run the covers in Heavy Paper Mode from the Paper Tray 

Bypass.

2 Fan the stack before loading to minimize jams.

3 Load with the short (8 3/4 inch) edge as the lead edge.  The 

scored  “bump” should be placed towards the back of the tray.  
For a smooth fold, the “bump” should be facing down.

4 From the Paper Tray Bypass menu, select “size input” and enter 

298 mm for the left to right value, with 222 mm for the front to 
back value.  This will allow the auto center and auto magnification 
features to work correctly when the original is corner registered 
on the platen glass.

5 Clear jams carefully or machine damage may occur.  Refer to the 

Heavy-Weight Paper section in this guide for specific jam-
clearing instructions.

•

These 90 lb Index Docupac Folders are specially made to be 
short grain.  When run as detailed above, feeding performance 
should be good and will be similar to standard 8.5 x 11” 90 lb 
Index, but will not equal 24 lb Image Series LX feeding 
performance.

•

Image quality will be good, but may experience the same 
shortfalls (mottle, deletions, etc.) that most heavy-weight papers 
display.  See the Heavy-Weight Paper section in this guide for 
more details.

12 3. . .