Xerox 4213 用户指南

When the optional high capacity feeder is installed and selected
as a paper source through the user interface, the Paper Source
commands as described in chapter 3 of the Xerox 4213 Laser
Printer Programmer Reference may select a different paper tray.
The following table illustrates these differences:

Table 1.

HCF

The high capacity feeder is addressed as the default tray and is
accessed by the 

E 

&l0H command.  All the other paper tray

source commands work as described in the 4213 Programmer
Reference.

HCF-TRAY1

The high capacity feeder is addressed as both the default tray
and tray 1; therefore, the HCF is accessed by either the 

E

&l0H or the 

E 

&l1H command.  The paper tray 2 command (

E

&l4H) works as described in the 4213 Programmer Reference.

HCF-TRAY2

The high capacity feeder is addressed as both the default tray
and tray 2; therefore, the HCF is accessed by either the 

E

&l0H or the 

E 

&l4H command.  The paper tray 1 command (

E

&l1H) works as described in the 4213 Programmer Reference.

HCF-TRAY1-2

The high capacity feeder is addressed as the default tray no
matter which paper source command (

E 

&l0H, 

E 

&l1H, or 

E

&l4H) is sent.

If “best fit” does not give the font you expect, choose the font
by font ID or define the correct criteria for the desired font.

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE UPDATE  

1