Xerox 4050 服务手册

This chapter contains procedures for the tasks you must perform
to maintain your LPS.

When the sensor in the reservoir detects a low level of lubricant,
the following message displays on the printer control console:

LOW ON FUSER LUBRICANT

Once the lubricant runs out, the printer stops, and the following
message displays on the printer control console:

FUSER LUBRICANT CONTAINER IS EMPTY

Printing cannot resume until you add fuser lubricant.

Follow these steps to add fuser lubricant:

1. Open the right printer door.

2. Place a drop cloth on the floor under the fuser area.

WARNING:  The fuser area can reach temperatures of
approximately 370°F (188°C).  Exercise care to prevent burns
when working in this area.

3. Open the fuser drawer.

XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE

6-1