Xerox 721 服务手册
TABLE of CONTENTS
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
v
Safety
Notes
Your Xerox Wide Format 721P Engineering Printer has been
designed and tested to meet strict safety requirements. These
include safety agency examination and approval and compliance
to established environmental standards.
designed and tested to meet strict safety requirements. These
include safety agency examination and approval and compliance
to established environmental standards.
Please read the following instructions carefully before operating
the Xerox Wide Format 721P Engineering Printer and refer to them
as needed to ensure the continued safe operation of the product.
the Xerox Wide Format 721P Engineering Printer and refer to them
as needed to ensure the continued safe operation of the product.
Follow all warnings and instructions marked on or supplied with the
product.
product.
Unplug the printer from the wall outlet before cleaning the exterior.
Always use materials specifically designated for the Xerox Wide
Format 721P Engineering Printer. Use of other materials may
result in poor performance and could create a hazardous situation.
Always use materials specifically designated for the Xerox Wide
Format 721P Engineering Printer. Use of other materials may
result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this
operator manual for the proper cleaning methods.
operator manual for the proper cleaning methods.
Never use supplies or cleaning materials for purposes other than
what they were intended. Keep all supplies and materials out of
the reach of children.
what they were intended. Keep all supplies and materials out of
the reach of children.
Do not use this product near water, wet locations, or outdoors.
This product is equipped with a three-wire, grounding-type plug
(i.e., a plug having a grounding pin). This plug will only fit into a
grounding-type power outlet. This is a safety feature. To avoid the
risk of electric shock, contact your electrician to replace the
receptacle if you are unable to insert the plug into the outlet.
(i.e., a plug having a grounding pin). This plug will only fit into a
grounding-type power outlet. This is a safety feature. To avoid the
risk of electric shock, contact your electrician to replace the
receptacle if you are unable to insert the plug into the outlet.
Never use a ground adapter plug to connect the printer to a power
source that lacks a ground connection terminal.
source that lacks a ground connection terminal.
This product should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of
power available, consult your local power company.
indicated on the marking label. If you are not sure of the type of
power available, consult your local power company.
The power supply cord is the disconnect device for this equipment.
Make sure that the installation is near the socket outlet and is
easily accessible.
Make sure that the installation is near the socket outlet and is
easily accessible.
Do not allow anything to rest on the power cord. Do not locate the
printer where someone will step on the cord.
printer where someone will step on the cord.
Slots and openings in the cabinet and in the back and bottom of
the printer are provided for ventilation. To ensure reliable
operation of the printer and to protect it from overheating, these
openings should never be placed near a radiator or heat register.
The printer should not be placed in a built-in installation unless
proper ventilation is provided.
the printer are provided for ventilation. To ensure reliable
operation of the printer and to protect it from overheating, these
openings should never be placed near a radiator or heat register.
The printer should not be placed in a built-in installation unless
proper ventilation is provided.
Never push objects of any kind into the slots of the printer as they
may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock.
may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the printer.