Xerox 721 服务手册
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
49
7. User
Modes
This chapter provides information for the 11 User Modes available
on the Xerox Wide Format 721P Printer.
on the Xerox Wide Format 721P Printer.
User Mode 1: Test Print
User Mode 2: Date and Time
User Mode 3: Low Power Saver Mode
User Mode 4: High Power Saver Mode
User Mode 5: Media Cut At power on
User Mode 6: Detack Lamp Control Mode
User Mode 7: Attention Beeper Enable
User Mode 8: Custom Setting - Plain Paper
User Mode 9: Custom Setting – Vellum/Tracing Paper
User Mode A: Custom Setting – Film
User Mode b: Image Enhancement
User Mode 1 (Test Print) “U1”
An electronically stored test print can be printed. The pattern of
the test print and the width of the test print are preset and cannot
be changed
the test print and the width of the test print are preset and cannot
be changed
1. To enter User Mode 1:
Press the [Menu] Key once when the printer is in the Standby
(idle) Mode. The [Menu] Key lights green and the left side of the
Status Display indicates “U1” flashing.
(idle) Mode. The [Menu] Key lights green and the left side of the
Status Display indicates “U1” flashing.
2. The right side of the Status Display indicates the test print
status.
- - - (on steady): Test print mode is not available, printer warming
000 (on steady): Test print is available.
000 (flashing): Test print in process
- - - (on steady): Test print mode is not available, printer warming
000 (on steady): Test print is available.
000 (flashing): Test print in process
Menu
Enter
Online
Menu
Enter
Online