Xerox 721 服务手册
USER MODES
58
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
User Mode 6 (Detack Lamp Control Mode) “U6”
If the print quality of prints made on Film media lack sharpness or
have a light overall appearance, a Detack Lamp in the print
process can be switched OFF using Mode 6. This action
increases the amount of Toner transferred to the print.
have a light overall appearance, a Detack Lamp in the print
process can be switched OFF using Mode 6. This action
increases the amount of Toner transferred to the print.
NOTE: If a higher than normal jam rate is experienced, the Detack
Lamp may have to be switched on again.
Lamp may have to be switched on again.
1. With the printer in the Standby (idle) condition, press the
[Menu] Key 6 times to enter Mode 6.
The [Menu] Key lights and the display indicates “U6” on the left
side of the display and the current setting on the right side.
side of the display and the current setting on the right side.
2. Press
[Enter]
3. Press the [
→ or ← ] key to change the value to 0 (OFF)
The value in the display will change to 0 (OFF)
The range is 1 – On and 0 - Off
NOTE: Factory default is “0”, Off.
4. Press the [Online] Key to exit the User Mode.
Menu
Enter
Online
Press [Menu] 6 times
.
Menu
Enter
Online
Menu
Enter
Online
Menu
Enter
Online