Xerox 8830 folder 服务手册
September 2001
88XX Series Folder Operator Manual 38
Jam Clearance Procedures
Message Display
Messages will be displayed on the Alphanumeric Control Panel, or a
code will be displayed on the Numeric Control Panel. The message will
scroll from right to left.
code will be displayed on the Numeric Control Panel. The message will
scroll from right to left.
Alarm messages and the required actions are listed below.
a-01
DOOR OPEN
Close door.
a-02
a-02
BRIDGE SENSORS COVERED
Remove media jam from Bridge and press Reset. Refer to the
Clearing
Bridge Jams
procedure.
a-03
UPPER POCKET SENSOR COVERED
Remove media jam from Upper Pocket and press “Reset”. Refer to the
Clearing Upper and Lower Pocket Jams
procedure.
a-04
LOWER POCKET SENSOR COVERED
Remove media jam from Lower Pocket and press “Reset”. Refer to the
Clearing Upper and Lower Pocket Jams
procedure.
a-05
CROSS POCKETS SENSOR COVERED
Remove media jam from Cross Folder. . Refer to the
Clearing Cross
Folder Jam
procedure.
a-06
24V MISSING
a-07
ENCODER OR M2 MOTOR FAULT
Check if all the doors are closed and press “Reset”. If the message
returns, call for service.
returns, call for service.
a-07
ENCODER OR M2 MOTOR FAULT
Check if all the doors are closed and press “Reset”. If the message
returns, call for service.
a-08
returns, call for service.
a-08
STEP MOTORS FAULT
TBD
a-10
TBD
a-11
FIRST BIN FULL
Empty basket and press “Reset”.
a-12
a-12
SECOND BIN FULL
Empty basket and press “Reset”.