Xerox 8850 服务手册
OFF-LINE SETUP MENU
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
23
Setting the timers
To set the Power Saver mode and Rest mode timers:
1. Access
the
PRINTER MENU. See "Accessing the Printer
Menu" in this chapter.
2. Press
the
Previous or Next key until TIMERS is displayed.
3. Press
the
Enter key to select TIMERS. The current setting for
the READY TO POWER SAVER option is displayed.
4. Do one of the following:
•
To select the READY TO POWER SAVER option, press
the Enter key.
the Enter key.
•
To select the POWER SAVER TO REST option:
-
Navigate to it by pressing the Previous or Next key.
- Press
the
Enter key to select the option.
5. Press
the
Previous or Next key to scroll through the range of
values.
6. When you scroll to the desired value, press the Enter key to
save your selection.
7. Press
the
On-line/Off-line key to return to on-line mode.
•
The on-line/off-line indicator will light.
•
The display will indicate "XES SYNERGIX 8850 IDLE."
Adjusting the print density
To adjust the print density:
1. Access
the
PRINTER MENU. See "Accessing the Printer
Menu" in this chapter.
2. Press
the
Previous or Next key until PRINTER
ADJUSTMENTS is displayed.
3. Press
the
Enter key to select PRINTER ADJUSTMENTS. The
current setting for the DENSITY option is displayed.
4. Press
the
Enter key to select DENSITY.
5. Press
the
Previous or Next key to scroll through the range of
values.
6. When you scroll to the desired value, press the Enter key to
save your selection.
7. Press
the
On-line/Off-line key to return to on-line mode.
•
The on-line/off-line indicator will light.
•
The display will indicate "XES SYNERGIX 8850 IDLE."