Xerox 8000AP 补充手册
I
MPORTING
D
ENSITY
M
EASUREMENTS
94
Example of 1D Status T density for an arbitrary page
This file format is used to specify the Status T density measurements of a user-defined patch
page. The value in the first column is the ink/toner percentage of the patch. The first
percentage must be 0 and the last percentage must be 100, and the percentages in between
these numbers must increase.
page. The value in the first column is the ink/toner percentage of the patch. The first
percentage must be 0 and the last percentage must be 100, and the percentages in between
these numbers must increase.
#!EFI 3
# EFI ColorWise 2.0 Data
type: 1DST
# percnt Cyan Magent Yellow Black
0.0000 0.0300 0.0400 0.0200 0.0400
0.3922 0.0600 0.0700 0.0800 0.0700
1.1765 0.1000 0.1000 0.1000 0.1000
# EFI ColorWise 2.0 Data
type: 1DST
# percnt Cyan Magent Yellow Black
0.0000 0.0300 0.0400 0.0200 0.0400
0.3922 0.0600 0.0700 0.0800 0.0700
1.1765 0.1000 0.1000 0.1000 0.1000
(…more data…)
98.0000 1.6700 1.3400 0.8900 1.6700
100.0000 1.7200 1.4300 0.9300 1.7500
100.0000 1.7200 1.4300 0.9300 1.7500