Xerox 7000AP 发行公告
Key Features
19
7.
If necessary, in the
Corrected
column, adjust the CMYK values.
8.
Click
Apply
.
A similar procedure is performed to define CMYK colors as spot colors.
Protecting Spot Colors in the Workflow
Once you have defined spot colors to protect, you need to indicate in the job
workflow if one or more of these spot colors should be protected.
workflow if one or more of these spot colors should be protected.
On the
Color
tab, under
Spot workflow
parameters, two check boxes have been
added for protecting spot colors:
•
Protect RGB colors
: to retain RGB colors as defined
•
Protect Gray colors
: to retain gray colors as defined
•
Protect CMYK colors
: to retain CMYK colors as defined.
Note: If you protect RGB or CMYK colors, all colors in the job with that specific
combination will be protected. For example, a specific color combination used in
a logo may align with a color used in an image in the job. The spot
transformation affects the image color as well as that of the logo, sometimes to
undesired results.
combination will be protected. For example, a specific color combination used in
a logo may align with a color used in an image in the job. The spot
transformation affects the image color as well as that of the logo, sometimes to
undesired results.