Xerox 7000AP 发行公告
Key Features
3
Software Installation
For CX print server software issues, contact your customer service and technical
support.
support.
Key Features
This section lists features that were added to the release of CX print server software.
Hardware Components
The CX print server platform includes:
•
2 × Dual-Core Intel Xeon Processor 2GHz with 1333 MHz FSB
•
1 GB FBDIMM (Fully Buffer Dimm) Host Memory
•
Creo dedicated hardware
SSC ( Signal Splitter Controller)
Fusion XM2 board with 1024 MB image memory, 1 × 512 MB (input
memory), 2 × 256 MB (output memory)
memory), 2 × 256 MB (output memory)
•
DVD-RW drive
•
User disk:2 × 250 GB SATA2 disks as system disk
•
Printer (Image) disk: 2 × 250 GB SATA2 disks as image disks
Spire Tabs Plug-In
The Spire Tabs plug-in for Acrobat (version 7.0 or later) is used to create and place
tabs in your unprocessed (PDF or PostScript) jobs, manage the tab and text
attributes, and save a set of attributes for future use.
tabs in your unprocessed (PDF or PostScript) jobs, manage the tab and text
attributes, and save a set of attributes for future use.
When using the Spire Tabs plug-in to create tabs, it is not necessary to define
exceptions on the
exceptions on the
Exceptions
tab.
Important: When you install the CX print server version 1.0 from DVD #1, all the files
stored on disks C and D are deleted. Make sure to back up any important customer files
before installing version 1.0. For more information, see the CX print server 1.0 Technical
Manual.
stored on disks C and D are deleted. Make sure to back up any important customer files
before installing version 1.0. For more information, see the CX print server 1.0 Technical
Manual.
Important: If you add tabs to your job, you need to select the Mixed paper
size document check box (in the Job Parameters window, on the Paper Stock
tab, under Mixed paper size).
size document check box (in the Job Parameters window, on the Paper Stock
tab, under Mixed paper size).